GFL SHAKING INCUBATOR 3031

b>GFL SHAKING INCUBATOR 3031

Microprocessor controlled

span lang="en-GB">This specialist for gentle mixing or vigorous shaking is used for applications that demand exactly reproducible orbital motions and temperatures up to + 70°C, for example incubations, span lang="en-GB">fermentations, homogenisations, chemical and biochemical reactions, enzyme and tissue studies as well as for cultivating bacteria cultures.

span lang="en-GB">Control:span lang="en-GB"> microprocessor controlled (temperature regulation with PID control). Optimum temperature distribution throughout the cabinet interior via forced air circulation. Microprocessor-controlled timer displays continuously the current remaining running time of the incubation time and signals acoustically its expiry. Built-in RS 232 interface for data report and remote control via PC.

span lang="en-GB">Control panel:span lang="en-GB"> clearly arranged with soft-touch keys, set and actual values of timed run, shaking frequency and temperature are shown on three LC displays. Temperature and speed control can be set in steps of 0.1°C and/or 1 rpm.

span lang="en-GB">Safety:span lang="en-GB"> electronic monitoring of the temperature regulator (in case of fault, the cause is reported on the display), limits for over- and under-temperature alarms (visual and audible) adjustable. Additional thermostatic over temperature cut-off. Automatic stop of the heating and the shaking movement when the lid is opened.

span lang="en-GB">Drive:span lang="en-GB"> microprocessor controlled, independent of load, and provides a gentle start-up. The unit is driven by an ac motor, protected against overload, which can be set in 1 rpm increments. The robust, durable mechanism is service-friendly and provides for reliable continuous operation.

span lang="en-GB">Housing:span lang="en-GB"> made of highly shock-resistant polystyrene and electrolytically galvanised sheet steel, powder-coated. Hinged lid made of acrylic glass. The shaking platform, made of anodised aluminium, has four plastic pins for safe fixing of accessories.

span lang="en-GB">Cooling coil:span lang="en-GB"> built in as standard, for applications below ambient temperature, for the connection to tap water or an external recirculating chiller.

The Shaking Incubator is maintenance-free and has the CE mark.

u>Technical data

span lang="en-GB">Temperature range: span lang="en-GB">+20°C to +70°C, from approx. 8°C above room temperature

span lang="en-GB">Temperature constancy:span lang="en-GB"> +/- 0.2°C, temporal

span lang="en-GB">Timer: span lang="en-GB">1 min. to 999 hours, 59 minutes; display of residual time, acoustic alarm on expiry

span lang="en-GB">Capacityb>: 46 l

b>Interface: RS 232

b>Shaking motion: orbital

span lang="en-GB">Load:span lang="en-GB"> max. 12 kg, even load distribution

span lang="en-GB">Shaking frequency: span lang="en-GB">10 – 250 rpm

span lang="en-GB">Shaking amplitude: span lang="en-GB">30 mm

span lang="en-GB">Shaking platform:span lang="en-GB"> W 450 mm, D 450 mm

b>Interior dimensions: W 450 mm, D 450 mm, H 280 mm

b>Exterior dimensions: W 525 mm, D 665 mm, H 570 mm

span lang="en-GB">Net / Gross weight: span lang="en-GB"> 38.5/50.0 kg

span lang="en-GB">Electrical connection: span lang="en-GB"> 230V*/ 50...60 Hz / 0.8 kW

span lang="en-GB">* other voltages on request

b>ORDER NO.: GFL-3031